For Large and Medium EZnet Storage Nets on Drywall:
Determine where exactly you want to install your net, and mark the spot at the exact height you want the upper left anchor knob to be. With a drill, awl or other sharp tool make a hole in the drywall (approximately 5/16" wide), insert a Toggler® anchor into the hole, pushing or hammering it until it is flush with the wall. Using one of the included all purpose screws, screw an anchor knob into the Toggler until it is flush with the wall. Repeat this process perpendicularly and parallel to the first knob at the distances indicated on the diagram above, and then stretch the net over all four installed knobs.
For Small EZnet Storage Nets on Cabinet Doors:
Determine where exactly you want to install your net, and mark the spot at the exact height you want the upper left anchor knob to be. With a drill, awl or other sharp tool, make a small hole in the wood surface. Using one of the included wood screws, screw an anchor knob into the wood until it is flush with the surface. Repeat this process perpendicularly and parallel to the first knob at the distances indicated on the diagram above, and then stretch the net over all four installed knobs.